DazzLeaf SMARTii 400mAh 510 PREHEAT OLED SCREEN BATTERY.
SMARTii 400mAh 510 PREHEAT OLED SCREEN BATTERY The new SMARTii OLED Screen Battery is a compact, pocket-size 510 cartridge battery designed for maximum discreetness and portability. The SMARTii can easily adjust the voltages by pressing the Power Button. The featured OLED screen displays your battery level, voltage level, puff counter, and all the necessary vaping information for the user to monitor easily.
The SMARTii is powered by an internal 400mAh battery with a bottom Type-C charging port. You can enjoy extended vaping sessions without having to worry about running out of power.
Specifications:
Compact Pocket Size: Φ14 x95.5mm
Powered by an A grade 400 Battery with a BOTTOM Type C Charging Port
Slim vape pen design for maximum discreetness and portability
Cartridge Size: Fits most 0.5ML ~ 2ML Carts
Temperature Settings: 2.4V - 4.2V
Preheating Function: 1.8V Preheat for 15 seconds, On-screen countdown
Auto heat shut-off after 15 seconds of use for protection
Auto screen blanking after 5 seconds of no operation.
OLED Screen Lets You See Your Battery Level, Voltage, and Puff Counter All in 1 place
30-minute Safety Shutoff
How to USE:
Click five times to turn ON/OFF.
Click two times to Preheat to 1.8V for 15 seconds and go.
Click three times to adjust the Voltage to your favorite settings - 2.4V - 4.2V
Package includes:
1 x DAZZLEAF SMARTii 400mAh 510 PREHEAT OLED SCREEN BATTERY
Charging State:
510 TYPE C battery should be charged an hour before the first use.
Type-C Fast Charging
Fully Charged: The battery symbol is displayed in full.
75%-100%: 4 Grids;
50%-75%: 3 Grids;
25%-50%: 2 Grids;
0%-25%: 1 Grids;
Battery dead: 0 Grids;
OLED Screen Display:
Power -ON Display: “DAZZLEAF”
Power -OFF Display: “OFF”
“NO ATOMIZER”: If the cartridge is not connected to the battery, "NO ATOMIZER" will display on the screen for 2 seconds.
“LOW BATTERY”: The system detects that the battery's power is too low to work and needs to be charged.
“SHORTED”: When the cartridge resistance is less than 0.5ohm, or the output is short-circuited, the MOS is automatically turned off to prevent burning.
“OVER TIME”: Auto heat shut-off after 20 seconds of use for protection
OFF State: Hold the Power button for 5 seconds to clear the number of puffs.