The Puffco Peak by (Puffco). Introducing one of the most sought after E-Rig (electronic rig), the Peak features a built in bubbler, beautiful ergonomic design and powerful heating elements. The Peak operates by electronically heating up your loaded concentrates onto the atomizer and waiting until the LED light flashes three times to notify the user that it is ready. This device can also be used as a traditional dab rig by preheating the atomizer before applying the concentrates inside and covering it with the cap. Either option works perfectly and you will be satisfied with the results.
The Peak utilizes four different temperature presets in increments of 50F (450F/500F/550F/600F) which allows the device to cater towards a wider variety of substances and load sizes. This Puffco Peak provides an amazing vapor quality as the water filtration smooths down the vapor before reaching the user’s lungs while maintaining the flavor. Each and every hit you take from the Peak is filled with flavor that is strong and potent. The Peak provides between 15 to 20 strong draws before needing to be recharged. This device charges using a standard Micro USB cable and takes around 2 hours to fully recharge from empty to full.
CLEANING AND MAINTENANCE:
- YOU CAN PLACE THE CLEANING SWABS IN ISOPROPYL ALCOHOL BEFORE USE THEM TO WIPE DOWN THE CERAMIC BOWL. FOR THE BUBBLER, YOU CAN POUR A BIT OF ISOPROPYL ALCOHOL INSIDE, SWISH IT AROUND AND POUR IT OUT. THEN YOU RINSE OUT THE BUBBLER WITH WARM WATER. OVERALL THE PEAK REQUIRES VERY LOW MAINTENANCE SINCE ALL YOU NEED TO DO IS CLEAR THE GLASS BUBBLER AND CERAMIC BOWL.
- PUFFCO PEAK DEVICE
- Carrying Case
- Cleaning Swabs
- Loading Tool
- Micro USB Cable & Super Charger
- Extra Ceramic Bowl
- Carb Cap
HOW TO USE:
- Remove the glass bubbler from the base and fill it with water to just above the air holes.
- Attach the bubbler to the base, then hold down the power button for three seconds to power up the vaporizer.
- Dab your max into the bottom of the ceramic bowl then cover the bowl with the carb cap.
- Double click the power button to start the heating process.
- The peak will vibrate and the LED light will blink three times to indicate when heating is complete.
- Inhale from the bubbler to start vaping.
- Battery: 2S-18350 pack @ 1700 mAh
- Height: 7”
- Base: 2.75”
- Weight: 680 grams
- Temperature range: 232°C/450°F - 315°C/600°
- Charging: Two Hours
- One year warranty: manufacturer defects - electronic base only
- One month warranty: manufacturer defects - atomizer only
- 100% Satisfaction Guarantee
What in the box